Twin 12 Inch Subwoofer


Twin 12 Inch Subwoofer

Are you looking for a powerful and affordable way to upgrade your car’s audio system? If so, then you should definitely consider adding a subwoofer.

A subwoofer is a speaker that is designed to reproduce low-frequency sounds, and it can make a huge difference in the overall sound quality of your music. Subwoofers can be added to any car, regardless of the make or model, and they can be customized to fit your specific needs.

Twin 12 Inch Subwoofer

Here are six important points to keep in mind when choosing a twin 12 inch subwoofer:

  • Power handling
  • Frequency response
  • Sensitivity
  • Impedance
  • Enclosure type
  • Price

By considering these factors, you can choose a subwoofer that will meet your specific needs and provide you with the best possible sound quality.

Power handling

Power handling is an important specification to consider when choosing a subwoofer, as it determines how much power the subwoofer can handle without being damaged. Power handling is measured in watts, and it is typically divided into two categories: RMS power and peak power.

RMS power is the continuous power that the subwoofer can handle, and it is the most important specification to consider when choosing a subwoofer. Peak power is the maximum amount of power that the subwoofer can handle for short periods of time, and it is not as important as RMS power.

When choosing a subwoofer, it is important to make sure that the RMS power of the subwoofer is at least equal to the RMS power of your amplifier. If the RMS power of the subwoofer is lower than the RMS power of your amplifier, the subwoofer may be damaged when you turn up the volume.

For example, if your amplifier has an RMS power of 500 watts, you should choose a subwoofer with an RMS power of at least 500 watts.

In addition to RMS power and peak power, there are a few other factors that can affect the power handling of a subwoofer, such as the voice coil design, the cone material, and the enclosure type. However, RMS power is the most important specification to consider when choosing a subwoofer.

Frequency response

Frequency response is another important specification to consider when choosing a subwoofer, as it determines the range of frequencies that the subwoofer can reproduce.

  • Lower frequency limit

    The lower frequency limit is the lowest frequency that the subwoofer can reproduce. This is typically measured in hertz (Hz), and it is important to choose a subwoofer with a lower frequency limit that is low enough to reproduce the bass frequencies in your music.

  • Upper frequency limit

    The upper frequency limit is the highest frequency that the subwoofer can reproduce. This is also typically measured in Hz, and it is important to choose a subwoofer with an upper frequency limit that is high enough to reproduce the mid-bass frequencies in your music.

  • Flatness

    The flatness of the frequency response refers to how evenly the subwoofer reproduces the frequencies within its frequency range. A flat frequency response is ideal, as it means that the subwoofer will not overemphasize or underemphasize any particular frequency range.

  • Roll-off

    The roll-off of the frequency response refers to how quickly the subwoofer’s output decreases below its lower frequency limit or above its upper frequency limit. A steep roll-off is ideal, as it means that the subwoofer will not produce any unwanted frequencies outside of its frequency range.

When choosing a subwoofer, it is important to consider the frequency response of your amplifier as well. The frequency response of your amplifier should overlap with the frequency response of your subwoofer, or else you may not be able to hear the full range of frequencies that your subwoofer is capable of reproducing.

Sensitivity

Sensitivity is a measure of how efficiently a subwoofer converts electrical power into acoustic output. It is typically measured in decibels (dB), and it is expressed as the sound pressure level (SPL) that the subwoofer produces at a distance of one meter when it is fed with one watt of power.

  • Higher sensitivity is better

    A subwoofer with higher sensitivity will produce more sound output for the same amount of power than a subwoofer with lower sensitivity. This means that you can get louder bass from a subwoofer with higher sensitivity without having to use as much power.

  • Sensitivity and amplifier power

    The sensitivity of your subwoofer should be matched to the power of your amplifier. If your subwoofer has too high of a sensitivity, it may be damaged when you turn up the volume. Conversely, if your subwoofer has too low of a sensitivity, you may not be able to get enough bass output from it.

  • Typical sensitivity range

    Most subwoofers have a sensitivity in the range of 80 to 90 dB. This is a good range of sensitivity for most applications.

  • How to use sensitivity

    When choosing a subwoofer, it is important to consider the sensitivity of your amplifier as well. The sensitivity of your amplifier should be higher than the sensitivity of your subwoofer. This will ensure that you have enough power to drive your subwoofer and get the bass output that you want.

READ:  Best 12 Subwoofer for Car

Sensitivity is an important specification to consider when choosing a subwoofer, but it is not the only specification that you should consider. You should also consider the power handling, frequency response, impedance, and enclosure type of the subwoofer.

Impedance

Impedance is a measure of the electrical resistance of a subwoofer. It is typically measured in ohms (Ω), and it is important to match the impedance of your subwoofer to the impedance of your amplifier.

  • Common impedance values

    The most common impedance values for subwoofers are 4 ohms and 8 ohms. Some subwoofers also have a dual-voice coil design, which allows them to be wired to either 4 ohms or 8 ohms.

  • Matching impedance

    It is important to match the impedance of your subwoofer to the impedance of your amplifier. If the impedance of your subwoofer is too high or too low for your amplifier, it can damage your amplifier or your subwoofer.

  • How to find impedance

    The impedance of your subwoofer is typically printed on the back of the subwoofer. You can also find the impedance of your subwoofer by looking it up in the manufacturer’s specifications.

  • Wiring subwoofers

    When wiring subwoofers, it is important to wire them in parallel or in series. Wiring subwoofers in parallel will decrease the overall impedance of the subwoofer system. Wiring subwoofers in series will increase the overall impedance of the subwoofer system.

Impedance is an important specification to consider when choosing a subwoofer, but it is not the only specification that you should consider. You should also consider the power handling, frequency response, sensitivity, and enclosure type of the subwoofer.

Enclosure type

The enclosure type of a subwoofer is the type of box that the subwoofer is mounted in. The enclosure type affects the sound quality of the subwoofer, and it is important to choose the right enclosure type for your application.

  • Sealed enclosure

    A sealed enclosure is a box that is completely sealed, with no openings. This type of enclosure produces the most accurate and controlled bass response. However, sealed enclosures are typically smaller than other types of enclosures, and they can produce less bass output.

  • Ported enclosure

    A ported enclosure is a box that has one or more openings, called ports. These ports allow air to flow in and out of the enclosure, which helps to increase the bass output. Ported enclosures are typically larger than sealed enclosures, but they can produce more bass output.

  • Bandpass enclosure

    A bandpass enclosure is a box that has two or more chambers, each with its own tuning frequency. This type of enclosure produces a very specific range of bass frequencies. Bandpass enclosures are typically used for competition car audio systems.

  • Infinite baffle enclosure

    An infinite baffle enclosure is a type of enclosure that uses the trunk of your car as the enclosure. This type of enclosure is only possible in cars that have a large trunk. Infinite baffle enclosures can produce very good bass response, but they are not as efficient as other types of enclosures.

The type of enclosure that you choose for your subwoofer will depend on your specific needs and preferences. If you want the most accurate and controlled bass response, then a sealed enclosure is a good choice. If you want the most bass output, then a ported enclosure is a good choice. If you want a very specific range of bass frequencies, then a bandpass enclosure is a good choice. And if you have a large trunk, then an infinite baffle enclosure is a good choice.

READ:  Eclipse 12 Inch Subwoofer

Price

The price of a twin 12 inch subwoofer can vary depending on the brand, model, and features. However, you can expect to pay anywhere from $100 to $500 for a good quality subwoofer.

If you are on a budget, there are several affordable twin 12 inch subwoofers available. However, if you are looking for the best possible sound quality, you will need to spend more money.

Here are a few things to keep in mind when budgeting for a twin 12 inch subwoofer:

  • Brand: The brand of the subwoofer can have a significant impact on the price. Subwoofers from well-known brands typically cost more than subwoofers from lesser-known brands.
  • Model: The model of the subwoofer can also affect the price. Subwoofers with more features and higher power handling typically cost more than subwoofers with fewer features and lower power handling.
  • Features: The features of the subwoofer can also affect the price. Subwoofers with built-in amplifiers, EQs, and other features typically cost more than subwoofers without these features.

It is important to set a budget before you start shopping for a twin 12 inch subwoofer. This will help you narrow down your choices and find the best subwoofer for your needs and budget.

Once you have set a budget, you can start shopping for a twin 12 inch subwoofer. There are several places where you can buy subwoofers, including online retailers, car audio stores, and department stores.

Tips

Here are a few tips to help you get the most out of your twin 12 inch subwoofer:

Choose the right enclosure: The type of enclosure that you choose for your subwoofer will affect the sound quality and output. Sealed enclosures are the most accurate, but they produce less bass output than ported enclosures. Ported enclosures produce more bass output, but they are not as accurate as sealed enclosures.

Match the impedance: It is important to match the impedance of your subwoofer to the impedance of your amplifier. If the impedance of your subwoofer is too high or too low for your amplifier, it can damage your amplifier or your subwoofer.

Set the gain properly: The gain of your subwoofer amplifier controls the output level of the subwoofer. It is important to set the gain properly to avoid damaging your subwoofer or your amplifier.

Break in your subwoofer: Before you start using your subwoofer at high volumes, it is important to break it in. This will help to loosen up the suspension and improve the sound quality.

Closing Paragraph for Tips: By following these tips, you can get the most out of your twin 12 inch subwoofer and enjoy great bass sound for years to come.

Now that you know everything you need to know about twin 12 inch subwoofers, it’s time to choose the right one for your car. Consider your budget, needs, and preferences, and use the information in this article to make an informed decision.

Conclusion

Twin 12 inch subwoofers are a great way to add bass to your car audio system. They are powerful and efficient, and they can produce deep, rich bass that will make your music sound amazing.

When choosing a twin 12 inch subwoofer, it is important to consider the following factors:

  • Power handling
  • Frequency response
  • Sensitivity
  • Impedance
  • Enclosure type
  • Price

By considering these factors, you can choose a subwoofer that will meet your specific needs and budget.

If you are looking for the best possible bass sound, then a twin 12 inch subwoofer is a great option. These subwoofers are powerful and efficient, and they can produce deep, rich bass that will make your music sound amazing.

>> Check products about Twin 12 Inch Subwoofer, click here…

>> Check products about Twin 12 Inch Subwoofer, click here…

Images References :

About Florence McLean

close